In Stock90 Degree Bends
£15.26£16.95Save £1.69
In stock
or buy it now with
Free UK mainland delivery over £90.00, otherwise £6.95. Order by 2pm for same-day dispatch, Monday to Friday. Details
Questions about this product? Ask us or see delivery & returns.
Description
Pressed steel 90-degree bend to reduce resistance to airflow where changes in ducting direction are required. Using this product when making bends in your ducting will increase the efficiency of your fan.
Key facts
| Type | 90 degree bend |
|---|---|
| Material | Pressed steel |
| Sizes | 100, 125, 150, 200, 250 and 315 mm (4 to 12 inch) |
| Brand | Remat |
| Category | Ducting & Ductwork |
How to use
Use a bend wherever the ducting has to change direction. It has less resistance to airflow than a tight bend in flexible ducting, so your fan works more efficiently.
Secure the ducting at each end with ducting jubilee clips. See the rest of the ducting and fittings.
Questions
Why use a bend instead of bending the ducting?
A rigid bend gives less resistance to the airflow, so the fan works more efficiently.
What is it made of?
Pressed steel.
Growers’ guides
- Grow Room Setup: Sheeting, Flooring, Ducting and Loft Grow TentsHow to set up a grow room in a spare room, cupboard or loft: light-proof sheeting, a waterproof floor, ducting out through a wall and ceiling hangers.
- How to Size an Extraction Fan and Carbon Filter for a Grow TentWork out the inline fan and carbon filter your grow tent needs: tent volume, air changes a minute, the filter allowance, and a table by tent size.
