In StockAluminium Ducting
£8.05
Online price · 10% online discount included
Collection only
This item is too big for our parcel service, so we don't sell it for delivery on the website. Collect it from our Bristol shop, or ask us for a delivery price.
In stock now: ·
Seen it cheaper? Ask for a price match
Found it for less at Amazon or another UK shop? Send us the link. If we agree, we beat their price by 2% on our website for 24 hours and email you to say so. Not eBay listings.
Description
Standard uninsulated aluminium ducting is a simple, cost-effective way to connect your fans and filters to provide ventilation for your grow room or tent.
This lightweight, flexible duct is available in a range of diameters from 100mm/4" to 315mm/12" and comes boxed in five-metre and ten-metre lengths.
The ducting features a wire helix to hold it open and permit maximum airflow, although we would always recommend keeping bends to a minimum or the extraction will be reduced. If you need to add several angles to your ducting then it could be worth looking at the 90-degree bends.
All ducting can be attached using jubilee clips or tape.
Key facts
| Type | Flexible aluminium ducting, uninsulated |
|---|---|
| Diameters | 100, 125, 150, 200, 250 and 315 mm (4 to 12 inch) |
| Lengths | 5 m and 10 m |
| Construction | Wire helix holds it open |
| Fixing | Jubilee clips or tape |
| Brand | Global Air Supplies |
| Sizes | 100mm (4 inch) / 10m, 100mm (4 inch) / 5m, 125mm (5 inch) / 10m, 125mm (5 inch) / 5m, 150mm (6 inch) / 10m, 150mm (6 inch) / 5m, 200mm (8 inch) / 10m, 200mm (8 inch) / 5m, 250mm (10 inch) / 10m, 250mm (10 inch) / 5m, 315mm (12 inch) / 10m, 315mm (12 inch) / 5m |
| Category | Ducting & Ductwork |
How to use
Match the diameter to the fan and filter, stretch the ducting out and fix each end with a ducting clip or tape. Keep the run short and the bends few: every bend cuts the airflow.
See how to size a fan and carbon filter for the allowance to make for ducting.
Questions
Does it matter how many bends there are?
Yes. Keep bends to a minimum or the extraction is reduced.
How do I fix ducting to a fan or filter?
With jubilee clips or tape.
